INSTRUCTIONS FOR ADJUSTING THE TIME + GRAVITY CLOCK FACE IN IT’S FRAME

Instructions for adjusting clock face in metal frame

1. Using the open box to hold the clock in place, flip it over so the back side is up.

2. Pop out all four angled/metal brackets, which will release the glass and black back side from the metal frame.

3. *IF glass has separated from the black base, lift out the black back and glass together, and position the glass into the groove of the black base

*It may  already be securely in the groove, if so, you can skip to step 4.

4. Center the base/glass into the metal frame. 

• You can lift the frame and base/glass together and look to see if it's in the approximate right place.

• Also look to make sure none of the numbers will get pinched into edge glass. The numbers should be shaken in the middle to avoid this

• Put the brackets into the designated groove (see video for visual of this)

• As you put the brackets back in, the face WILL shift back and forth, but you'll be able to get it into the right place with the fourth and final bracket. It may take a few tries to get the feel of it.